Shenzhen Wankeda Technology Ltd.
Main products:cctv,ip camera,cctv camera
Products
Contact Us
  • Contact Person : Ms. Qin wendy
  • Company Name : Shenzhen Wankeda Technology Ltd.
  • Tel : 86-755-83226855
  • Fax : 86-755-82708955
  • Address : Guangdong,shenzhen,A1528 baohua buld,huaqiangbei Rd,futian Dist,shenzhen
  • Country/Region : China
  • Zip : 518000

6 colors Portable Power Source for electronic products

6 colors Portable Power Source for electronic products
Product Detailed
1,Input: 5V-----500mA 2,Output: DC5V---500mA 3,Capacity: 2200mAh

6 colors Portable Power Source for electronic products

 

Product Image:

Specifications:

Battery type: Lithium ion                                   Capacity: 2200mAh

Input: 5V-----500mA                                         Output: DC5V---500mA

Charging time: 6 hours                                       Cycle life: >500 times

Working temperature: -10-40°C                           Storage temperature: -20-50°C

Size: 91*24.7*24.7mm                                       Weight: 75g

About this user manual

Congratulation to you! You are purchasing multi-charger system power bank. It is a compact size multiple power system that is designed to power or recharge batteries of variety of portable electronic devices including most cellular phones, game consoles, digital cameras,MP3/MP4players,Bluetooth headsets while you travel. This user manual outlines the operating procedure, safety precautions. Please read this manual carefully to make sure you are using this Multi-Charger properly, and retain for future reference.

Important safety precaution

Please note the following precautions before using the power bank main unit. Failure to comply with followings may be dangerous and damaged to your portable electronic devices.

1. Power bank main unit contains internal Lithium ion (Li-ion) battery       2200mAh.Upon initial use or after a prolonged storage period, the charged once before use. The main unit’s full performance is achieved only after 2 or 3 complete charge and discharge cycles.

2. Use only the specified AC Power Adaptor, connecting cable.

3. Using an incorrect AC Power Adaptor, connecting cable or power tips can damage your portable electronic devices and power bank.

4. Always charge power bank main unit in a well ventilated area, don’t leave the power bank main unit in hot or cold places.

5. Don’t immerse the power bank main unit in water, or expose to moisture or rain.

6. Do not drop, knock, or shake the main unit, rough handling can beak internal precision components or boards.

7. Keep the main unit and its power tips and parts, including out of the reach of small children.

8. During the charging time, surface of power bank main unit will feel warm, but this is normal as charging/discharging used to generate heats.

9. Keep the power bank main unit away from fire or other sources of extreme heat. Exposure of the main unit to extreme heat may result in an explosion.

10. Do not short-circuit. A short-circuit may cause damage to the main unit.

11. Unauthorized changes or modifications may void your right to use the produce.

12. While you are using the mobile power bank, always meet any special regulations in force in any area and always switch off your phone or portable electronic devices whenever it is forbidden to use. For example, during landing-or-near the medical precision equipment, when it may cause interface or damage, don’t use the power bank main unit for transferring power at that time.

Product overview

            

1. Charging Input Port

   Input interface is Micro USB connector

2. Charging Output Port

Output port is USB A-type connector

3. Indicator For Output

   The blue LED display the output is turned on.

   It is turned off when the battery is used up.

4. Charging Display

   The red LED is turned on when power bank is charging.

   The red LED is turned off when the charging time is over.

Charging L261

1. Use USB-DC3.5 Cable and Micro USB connector to charge power bank, charging from adapter’s USB or computer’s USB.

2. Upon initial use (or after a prolonged storage period), the power bank should be fully charged in approximately about 6 hours. The red LED will be turned on during the charging time, and turned off when the charging time is over. The product has an end of charge battery detection system which ends charging automatically after it is fully charged.

To charge other devices

Power bank fits to charging digital communications products with DC-5V, packing with changeable connectors. It’s compatible with most mobiles and digital equipments. When the user’s devices are connected, the blue LED will be turned on. The blue LED will be turned off when the battery is used up. Please don’t to charge the other devices when the power bank is charging.

Accessories

1.power bank main unit                                           2.USB-DC3.5 cable

3.Apple dock tip                                                       4.Mini USB tip

5.Micro USB tip                                                       6.NOKIA tip

  

6 colors Portable Power Source for electronic products



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.